Product Description

M10LevelingFoot is an M10 threaded, adjustable leveling foot providing a simple and reliable solution for precise positioning of small machine frames, workbenches, and custom structures.

The foot consists of a Ø33 × 13 mm injection-molded PP (polypropylene) base combined with a galvanized M10 threaded stud available in different lengths. The product is offered in five versions, with an overall height ranging from 30 to 70 mm depending on the selected type, allowing up to 30–40 mm of leveling adjustment.

Each leveling foot includes a lock nut for securing the adjusted position. Installation and tightening of the lock nut are both performed using a 17 mm open-end wrench (tool not included).

Building your own machine frame, stand, or custom furniture?

M10LevelingFoot is designed for builders who need a simple, bolt-on leveling solution for M10-threaded machine frames and custom structures. It screws directly into existing M10 threads, locks in place with a counter nut, and can be repositioned at any time.

It is an ideal choice for machine bases, stands, workbenches, and custom frames where quick adjustment and fine leveling are required — without additional mechanisms. 👉 SelfBuild

❓ How much load can one leveling foot support?

Each leveling foot can support up to 250 kg under static load. Final load capacity always depends on the overall structure design.

❓ Can it be used outdoors?

The product is primarily intended for indoor use. The threaded stud is galvanized, but prolonged outdoor exposure may cause corrosion, and the plastic foot may degrade over time due to UV radiation.

❓ Is it suitable for dynamic loads?

No. The product is not designed for vibrating or moving machines. It is recommended for static or slowly changing loads only.

❓ What tools are required for installation?

Both installation and lock nut tightening are performed using a 17 mm open-end wrench.
Tools are not included.

❓ Does it include a lock nut?

Yes. Every leveling foot is supplied with an M10 lock nut.

❓ What is the leveling range?

Depending on the selected version, up to 30–40 mm of adjustment range is available.

❓ What structures can it be used with?

Typically suitable for: aluminum profile machine frames, steel box-frame structures, wooden furniture with embedded M10 metal inserts

❓ Can it be installed in Bosch Rexroth profiles?

Yes, provided that an M10 thread is present in the profile end or center hole.
For this profile type, you may also use our QuickFoot4040 self-tapping leveling foot, which can be driven directly into Bosch Rexroth–style profiles without pre-tapping. Both products share the advantage that when used with 40×40 mm profiles, the Ø33 mm foot diameter does not extend beyond the profile, allowing the frame to be placed flush against walls or adjacent furniture.

❓ Is the foot rubberized?

No. The foot is made of injection-molded PP (polypropylene). It is not anti-slip, but provides a hard, wear-resistant contact surface.

❓ How much clearance is required underneath for installation?

Minimum required height is 26 mm (plastic foot + drive nut + lock nut).
Additional exposed thread may be present depending on the selected version. It is recommended to leave some extra clearance for future leveling adjustments. The M10LevelingFoot-30 (shortest version) does not include a lock nut, therefore its minimum installed height is only 18 mm (plastic foot + drive nut).

❓ Where is the product manufactured?

The leveling foot is produced entirely within the European Union, in Hungary.  Manufacturer: Labsolver Kft.

❓ What if the product doesn’t work for me?

Our goal is to manufacture genuinely useful products that are meant to be used, not discarded. If for any reason this solution does not meet your expectations, please contact us. We do not want to sell products that end up unused.

❓ Do you provide CAD models of the product?

Yes.  For engineering, integration, and planning purposes, we provide downloadable 3D CAD models of the product in neutral formats. You can download the models here: 👉  Download CAD models (STEP / IGES)

If you are planning to use M10LevelingFoot in multiple pieces, series builds, or recurring projects, bulk pricing is available. 

Bulk pricing may depend on delivery schedule, packaging requirements, and destination. Transportation cost excluded.

To learn more about our services or report an issue, please get in touch.

    Fill out the contact form below to request a callback — our team will reach out shortly.